Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

If the laptop is loud, sounds irregular, and the bottom is hot, use this guide to replace your cooling fan.

  1. Turn off your laptop before you begin.
    • Turn off your laptop before you begin.

  2. Remove the nine 6 mm screws using a T5 Torx Screwdriver. Remove the two 10 mm screws using a T5 Torx Screwdriver.
    • Remove the nine 6 mm screws using a T5 Torx Screwdriver.

    • Remove the two 10 mm screws using a T5 Torx Screwdriver.

  3. Kits pour Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kits pour Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits
  4. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.
    • After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

  5. Remove the three 5mm screws using the T5 Torx Screwdriver. Remove the three 5mm screws using the T5 Torx Screwdriver.
    • Remove the three 5mm screws using the T5 Torx Screwdriver.

  6. Pull black wire and gray wire away from cooling fan clips using the tweezers. Pull black wire and gray wire away from cooling fan clips using the tweezers.
    • Pull black wire and gray wire away from cooling fan clips using the tweezers.

  7. Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector. Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector. Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.
    • Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Isaiah Vang

Membre depuis le 04/10/2018

645 Réputation

6 tutoriels rédigés

Équipe

UW Stout, Team S6-G6, Ogden Fall 2018 Membre de l'équipe UW Stout, Team S6-G6, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G6

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 7

Total : 173