Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the nine 6 mm screws using a T5 Torx Screwdriver.
-
Remove the two 10 mm screws using a T5 Torx Screwdriver.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic opening tool to carefully pry off the back cover.
-
Remove the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the three 5mm screws using the T5 Torx Screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull black wire and gray wire away from cooling fan clips using the tweezers.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull out the cooling fan from where it is attached and pull it up until you see where the wire is attached to the motherboard. Using the iFixit Opening Tools, detach the connector.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.