Aller au contenu principal

Introduction

If the laptop is lagging, and the mouse is slow to react, use this guide to replace your hard drive.

  1. Turn off your laptop before you begin.
    • Turn off your laptop before you begin.

  2. Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver. Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.
    • Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver.

    • Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.
    • After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

  5. Remove the three 4 mm Philips screws circled in the picture using a T5 Torx Screwdriver. Remove the three 4 mm Philips screws circled in the picture using a T5 Torx Screwdriver.
    • Remove the three 4 mm Philips screws circled in the picture using a T5 Torx Screwdriver.

  6. Lift it upwards and pull out the hard drive.
    • Lift it upwards and pull out the hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Isaiah Vang

Membre depuis le 04/10/2018

630 Réputation

6 tutoriels rédigés

Équipe

UW Stout, Team S6-G6, Ogden Fall 2018 Membre de l'équipe UW Stout, Team S6-G6, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G6

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 8

30 derniers jours : 32

Total : 181