Menu 

Vos paramètres

Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils
Mon panier (US Store)

On dirait que votre panier est vide

Parcourez notre boutique

Lenovo Ideapad Flex 4-1570 Speakers Replacement

Rédigé par : Isaiah Vang (et 2 autres contributeurs)
  • Commentaires : 2
  • Favoris : 0

Difficulté

Modérée

Étapes

5

Temps nécessaire

5 - 10 minutes

Sections

2

Drapeaux

0

Introduction

If you have trouble listening to sounds on your laptop, and the audio sounds distorted, use this guide to replace your audio speakers.

Outils

Acheter ces outils

Pièces

Aucune pièce spécifiée.

  1. Turn off your laptop before you begin.

    • Turn off your laptop before you begin.

    Modifier

  2. Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver. Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.

    • Remove the nine 6mm screws circled in the picture using a T5 Torx Screwdriver.

    • Remove the two 10mm screws circled in the picture using the same T5 Torx Screwdriver.

    Modifier

  4. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off. After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

    • After all of the screws are removed, use the iFixit opening tools to carefully snap the black cover off.

    Modifier

  5. Lift up on each speaker, one by one. The speaker should lift up with ease. Lift up on each speaker, one by one. The speaker should lift up with ease.

    • Lift up on each speaker, one by one. The speaker should lift up with ease.

    Modifier

  6. Unwind the speaker wire from the plastic brackets. Once you have the wire completely unwinded, use two blue iFixit tools to disconnect the speaker chip from the motherboard. Unwind the speaker wire from the plastic brackets. Once you have the wire completely unwinded, use two blue iFixit tools to disconnect the speaker chip from the motherboard.

    • Unwind the speaker wire from the plastic brackets. Once you have the wire completely unwinded, use two blue iFixit tools to disconnect the speaker chip from the motherboard.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Isaiah Vang

Membre depuis le 04/10/2018

645 Réputation

6 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

UW Stout, Team S6-G6, Ogden Fall 2018 Membre de l'équipe UW Stout, Team S6-G6, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G6

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 76