Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the nine 6 mm screws using a T5 Torx Screwdriver.
-
Remove the two 10 mm screws using a T5 Torx Screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic opening tool to carefully pry off the back cover.
-
Remove the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the battery by using a plastic opening tool or your fingers to push the connector towards the battery.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the three 4 mm screws using a T5 Torx Screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Locate the touch pad and remove the two 3 mm screws using a T5 Torx Screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the touch pad chip from the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the bronze piece of tape from touch pad and set it off to the side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Open the laptop and, with the assistance of the iFixit blue plastic tool, guide the touch pad through, it should come out on its own.
-