Réparez vos affaires Communauté Boutique

Lenovo Legion Y520-15IKBN Battery Replacement

Introduction

If your laptop will not start up or stay charged you may need to replace the battery. It is not a difficult project and the hardest part will be prying the back piece off.

For your safety, discharge your battery below 25% before disassembling your device. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, take appropriate precautions.

Shut down and unplug your device before beginning.

Ce dont vous avez besoin

  1. Lenovo Legion Y520-15IKBN Battery Replacement, Base Panel: étape 1, image 1 de 1

    • Shut down and unplug your device before proceeding.

    • Remove the thirteen 6.5 mm screws from the base plate using a Phillips #00 screwdriver.

    Modifier

  2. Lenovo Legion Y520-15IKBN Battery Replacement: étape 2, image 1 de 1

    • Flip the laptop on its side and wedge a spudger between the base panel and chassis, then pry around the perimeter until the base panel releases.

    • To get a better grip you may want to open the laptop slightly.

    • Lift the bottom panel off of the chassis.

    • During reassembly, make sure that the bottom panel clicks back into place on all four sides of the laptop.

    Modifier

  4. Lenovo Legion Y520-15IKBN Battery Replacement, Battery: étape 3, image 1 de 1

    • Remove the four 4 mm Phillips #00 screws securing the battery.

    Modifier

  5. Lenovo Legion Y520-15IKBN Battery Replacement: étape 4, image 1 de 2 Lenovo Legion Y520-15IKBN Battery Replacement: étape 4, image 2 de 2

    • Disconnect the battery connector by pulling the battery cable directly out of its port, toward the battery.

    • Do not pull on the socket itself or you risk damaging the motherboard.

    • If necessary, apply force and slowly wiggle the connector out of its socket. It should work its way out slowly.

    Modifier

  6. Lenovo Legion Y520-15IKBN Battery Replacement: étape 5, image 1 de 1

    • Lift the battery up and out of the chassis.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

11 autres ont terminé cette réparation.

Auteur

avec 9 autres contributeurs

Naomi Williams

Membre depuis le 10/04/18

771 Réputation

2 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Linn Benton Community College, Team S1-G2, Karnes Fall 2018 Membre de l'équipe Linn Benton Community College, Team S1-G2, Karnes Fall 2018

LBCC-KARNES-F18S1G2

4 membres

17 tutoriels rédigés

3 commentaires

Thank you, very helpful.

ska Smith - Réponse

I’ve damaged mine at step 4 and i don’t know how. Now the plug is loose and at the slightest touch, it goes into failure…I don’t now how to solve this, maybe replace the socket on the board by a new one. :(

Ricardo Peixoto - Réponse

Hello
I dont know if you are gonna read this, but you could try to glue the connector with Superglue to the board, but watch out to not tear it off or put superglue into the connector.

electro -

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 6

7 derniers jours : 36

30 derniers jours : 221

Total : 21,918