Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Lenovo Legion Y520-15IKBN Battery Replacement

Ce dont vous avez besoin

  1. Lenovo Legion Y520-15IKBN Battery  Replacement, Battery: étape 1, image 1 de 2 Lenovo Legion Y520-15IKBN Battery  Replacement, Battery: étape 1, image 2 de 2
    • Remove thirteen 6.5 mm screws from the bottom of the laptop using a Phillips #00 screwdriver.

  2. Lenovo Legion Y520-15IKBN Battery  Replacement: étape 2, image 1 de 1
    • Flip the laptop on its side and use a spudger or a credit card to pry the bottom covering off. To get a better grip you may want to open the laptop slightly.

    • The bottom piece will make popping noises as it is pulled from the laptop.

    • When reassembling make sure that the bottom piece clicks back into place on all sides of the laptop.

  3. Lenovo Legion Y520-15IKBN Battery  Replacement: étape 3, image 1 de 3 Lenovo Legion Y520-15IKBN Battery  Replacement: étape 3, image 2 de 3 Lenovo Legion Y520-15IKBN Battery  Replacement: étape 3, image 3 de 3
    • The battery is a long black rectangle located near the bottom of the device.

    • Use a Phillips #00 screwdriver to unscrew the four 4.0 mm screws holding the battery in place.

  4. Lenovo Legion Y520-15IKBN Battery  Replacement: étape 4, image 1 de 2 Lenovo Legion Y520-15IKBN Battery  Replacement: étape 4, image 2 de 2
    • There is a small bundle of wires held together with black tape located on the top edge of the battery. Unplug it completely.

    • When reassembling remember to plug these wires back into the port.

    • When removing the bundle it may feel fragile but don't be afraid to give it a tug.

  5. Lenovo Legion Y520-15IKBN Battery  Replacement: étape 5, image 1 de 1
    • Lift the battery out of the laptop body.

Conclusion

To reassemble your device, follow these instructions in reverse order.

11 autres ont terminé cette réparation.

Naomi Williams

Membre depuis le 10/04/18

771 Réputation

2 tutoriels rédigés

Équipe

3 commentaires

Thank you, very helpful.

ska Smith - Réponse

I’ve damaged mine at step 4 and i don’t know how. Now the plug is loose and at the slightest touch, it goes into failure…I don’t now how to solve this, maybe replace the socket on the board by a new one. :(

Ricardo Peixoto - Réponse

Hello
I dont know if you are gonna read this, but you could try to glue the connector with Superglue to the board, but watch out to not tear it off or put superglue into the connector.

electro -

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 6

7 derniers jours : 62

30 derniers jours : 238

Total : 21,979