Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Lenovo Legion Y520-15IKBN Battery Replacement

Introduction

If your laptop will not start up or stay charged you may need to replace the battery. To follow this guide you only need a plastic opening tool such as a spudger or credit card and a Phillips #00 screwdriver. It is not a difficult project and the hardest part will be prying the back piece off.

Ce dont vous avez besoin

  1. Lenovo Legion Y520-15IKBN Battery Replacement, Battery: étape 1, image 1 de 1

    • Ensure your device is completely OFF before performing this procedure.

    • Remove the thirteen 6.5 mm screws from the bottom of the laptop using a Phillips #00 screwdriver.

    Traduire

  2. Lenovo Legion Y520-15IKBN Battery Replacement: étape 2, image 1 de 1

    • Flip the laptop on its side and use a spudger or a credit card to pry the bottom cover off. To get a better grip you may want to open the laptop slightly.

    • The bottom piece will make popping noises as it is pulled from the laptop.

    • Remove the bottom cover from the laptop.

    • When reassembling make sure that the bottom piece clicks back into place on all sides of the laptop.

    Traduire

  4. Lenovo Legion Y520-15IKBN Battery Replacement: étape 3, image 1 de 1

    • Remove the four 4 mm Phillips #00 screws holding the battery in place.

    Traduire

  5. Lenovo Legion Y520-15IKBN Battery Replacement: étape 4, image 1 de 2 Lenovo Legion Y520-15IKBN Battery Replacement: étape 4, image 2 de 2

    • Disconnect the battery connector by pulling the battery cable downwards towards the battery.

    • Do not pull on the socket itself or you risk damaging the motherboard.

    • If this is difficult, apply force and slowly wiggle the connector out of its socket. It should work its way out slowly.

    Traduire

  6. Lenovo Legion Y520-15IKBN Battery Replacement: étape 5, image 1 de 1

    • Lift the battery out of the laptop body.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

11 autres ont terminé cette réparation.

Auteur

avec 9 autres contributeurs

Naomi Williams

Membre depuis le 10/04/18

771 Réputation

2 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Linn Benton Community College, Team S1-G2, Karnes Fall 2018 Membre de l'équipe Linn Benton Community College, Team S1-G2, Karnes Fall 2018

LBCC-KARNES-F18S1G2

4 membres

17 tutoriels rédigés

3 commentaires

Thank you, very helpful.

ska Smith - Réponse

I’ve damaged mine at step 4 and i don’t know how. Now the plug is loose and at the slightest touch, it goes into failure…I don’t now how to solve this, maybe replace the socket on the board by a new one. :(

Ricardo Peixoto - Réponse

Hello
I dont know if you are gonna read this, but you could try to glue the connector with Superglue to the board, but watch out to not tear it off or put superglue into the connector.

electro -

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 6

7 derniers jours : 32

30 derniers jours : 239

Total : 21,907