Réparez vos affaires Communauté Boutique

Lenovo Tab 2 A8 Rear-Facing Camera Replacement

Introduction

This guide illustrates the procedure to remove the rear-facing camera of your device.

Ce dont vous avez besoin

  1. Lenovo Tab 2 A8 Rear-Facing Camera Replacement, Removing the Back Panel: étape 1, image 1 de 3 Lenovo Tab 2 A8 Rear-Facing Camera Replacement, Removing the Back Panel: étape 1, image 2 de 3 Lenovo Tab 2 A8 Rear-Facing Camera Replacement, Removing the Back Panel: étape 1, image 3 de 3
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • Place the tablet face down on a soft, stable surface that will protect the screen.

    • Next, Scrape off the seal over the screw in the back of the tablet with a Metal Spudger.

    • Use the Phillips #000 Screwdriver to remove the M1.4 × 2.5 screw.

    • If the seal covering the screw has already been removed, please proceed to the next step in the process.

    • As the screw is small, you may wish to extract it using a pair of tweezers.

    Modifier

  2. Lenovo Tab 2 A8 Rear-Facing Camera Replacement: étape 2, image 1 de 3 Lenovo Tab 2 A8 Rear-Facing Camera Replacement: étape 2, image 2 de 3 Lenovo Tab 2 A8 Rear-Facing Camera Replacement: étape 2, image 3 de 3

    • Starting on the side, work your way around the the tablet to pop off the back cover. You will want to utilize a metal Spudger for this.

    • Some force may be required initially to pry the back cover off.

    • Note that the button tabs for this device are loose inside the case and will fall out when opening.

    Modifier

  4. Lenovo Tab 2 A8 Rear-Facing Camera Replacement, Rear-Facing Camera: étape 3, image 1 de 2 Lenovo Tab 2 A8 Rear-Facing Camera Replacement, Rear-Facing Camera: étape 3, image 2 de 2

    • Using a spudger, pry upward on the camera connector to free it from the motherboard.

    Modifier

  5. Lenovo Tab 2 A8 Rear-Facing Camera Replacement: étape 4, image 1 de 1
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • Use tweezers to grasp the camera connector and lift the camera out of its socket.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Tim Gales

Membre depuis le 10/06/15

478 Réputation

3 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Eastern Washington University, Team 2-4, Plummer Fall 2015 Membre de l'équipe Eastern Washington University, Team 2-4, Plummer Fall 2015

EWU-PLUMMER-F15S2G4

4 membres

13 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 5

30 derniers jours : 10

Total : 595