Introduction
How to replace the battery of a Lenovo ThinkPad P1 Gen2 laptop. The images and information in this guide were taken from this computer's service manual.
Ce dont vous avez besoin
-
-
Remove the 7 screws holding the base cover in place.
-
Remove the base cover.
-
-
-
Peel up the insulated sheet from the battery connector.
-
Unplug the battery connector in the direction showed by the arrow.
-
-
-
-
Remove the two M2 × L4 mm, flat-head screws.
-
Remove the two M2 × L5 mm, flat-head, screws.
-
To replace the battery & reassemble your device, follow these instructions in reverse order.
To replace the battery & reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.