Introduction
The RAM is a simple replacement that only requires your fingers to remove it. Make sure to only apply pressure on the edges and not the RAM itself so as not to damage any parts it might be connected to.
Ce dont vous avez besoin
-
-
-
Use a Phillips #1 screwdriver to remove the two 9mm screws holding the back cover.
-
-
-
In the first memory slot, use your fingertips to spread the two white tabs that are holding down the RAM. The RAM will raise to an angle.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
Équipe
UMass Dartmouth, Team S6-G5, Peak Spring 2019 Membre de l'équipe UMass Dartmouth, Team S6-G5, Peak Spring 2019
UMASSD-PEAK-S19S6G5
3 membres
9 tutoriels rédigés
