Introduction
If an internal piece of your Lenovo ThinkPad X1 Carbon (2nd Gen) needs to be replaced, use this guide to remove the back cover to gain access to the internal parts.
Before you begin, make sure your computer is off.
Ce dont vous avez besoin
-
-
Using a Phillips #0 screwdriver, remove the seven 7mm screws holding the back cover onto your computer.
-
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Équipe
Cal Poly, Team S18-G4, White Winter 2020 Membre de l'équipe Cal Poly, Team S18-G4, White Winter 2020
CPSU-WHITE-W20S18G4
4 membres
7 tutoriels rédigés
