Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Push the battery release switches away from each other.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the three 1.2mm Phillips #00 screws from the bottom panel.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic opening tool to pry off the bottom panel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The heatsink and fan are found on the right side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 1mm Phillips #0 screws from the fan.
-
Unscrew the four 2mm Phillips s#0 screws from the heatsink.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
To remove the heatsink and fan, pull the fan upwards and towards the center.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.