Aller au contenu principal

Introduction

This is just a prerequisite guide for the webcam and screen replacement guides.

  1. Use a spudger to remove the plastic covers from the LCD screen. Use a spudger to remove the plastic covers from the LCD screen.
    • Use a spudger to remove the plastic covers from the LCD screen.

  2. Remove the two 6.0mm screws on each side using Philips #0 head screwdriver as shown in the picture.
    • Remove the two 6.0mm screws on each side using Philips #0 head screwdriver as shown in the picture.

  3. Use a spudger to separate the bezel of the LCD screen.
    • Use a spudger to separate the bezel of the LCD screen.

  4. Continue along the edges lifting up and prying off the plastic LCD bezel. Continue along the edges lifting up and prying off the plastic LCD bezel. Continue along the edges lifting up and prying off the plastic LCD bezel.
    • Continue along the edges lifting up and prying off the plastic LCD bezel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Gabriel Cordova

Membre depuis le 02/10/2017

619 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team S1-G2, Thompson Fall 2017 Membre de l'équipe USF Tampa, Team S1-G2, Thompson Fall 2017

USFT-THOMPSON-F17S1G2

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 9

Total : 264