Aller au contenu principal

Introduction

Is your screen filled with black spots or not displaying images properly? Consider using this guide to replace the display of your device.

Pièces

Aucune pièce spécifiée.

  1. Make sure to power down and turn off your device before proceeding with the repair. Flip your laptop over so that the backside is facing you.
    • Make sure to power down and turn off your device before proceeding with the repair.

    • Flip your laptop over so that the backside is facing you.

  2. Using a Phillips #1 screwdriver, remove the eight screws securing the backplate.
    • Using a Phillips #1 screwdriver, remove the eight screws securing the backplate.

  3. Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate. Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate.
    • Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate.

  4. Remove the back panel from the device.
    • Remove the back panel from the device.

  5. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  6. Use the Phillips #1 screwdriver to remove the five screws securing the display mounts. Use the Phillips #1 screwdriver to remove the five screws securing the display mounts. Use the Phillips #1 screwdriver to remove the five screws securing the display mounts.
    • Use the Phillips #1 screwdriver to remove the five screws securing the display mounts.

  7. Use the metal spudger to pry up the lever securing the ribbon cable in it's connection housing. Use the metal spudger to pry up the lever securing the ribbon cable in it's connection housing. Use the metal spudger to pry up the lever securing the ribbon cable in it's connection housing.
    • Use the metal spudger to pry up the lever securing the ribbon cable in it's connection housing.

  8. Grab hold of the ribbon cable and pull it out of it's connection housing. Grab hold of the ribbon cable and pull it out of it's connection housing. Grab hold of the ribbon cable and pull it out of it's connection housing.
    • Grab hold of the ribbon cable and pull it out of it's connection housing.

  9. Disconnect the white and blue wires connected to the mounted circuit by grabbing them close to the connection and pulling upward. Disconnect the white and blue wires connected to the mounted circuit by grabbing them close to the connection and pulling upward.
    • Disconnect the white and blue wires connected to the mounted circuit by grabbing them close to the connection and pulling upward.

  10. Use the Phillips #1 screwdriver to remove the two screws securing the metal plate to expose the wire connection. Use the Phillips #1 screwdriver to remove the two screws securing the metal plate to expose the wire connection.
    • Use the Phillips #1 screwdriver to remove the two screws securing the metal plate to expose the wire connection.

  11. Disconnect the wire by pulling it upward from the motherboard. Disconnect the wire by pulling it upward from the motherboard.
    • Disconnect the wire by pulling it upward from the motherboard.

  12. Unclip the 5 wires connected to the display assembly from the motherboard and move them out of the way. Unclip the 5 wires connected to the display assembly from the motherboard and move them out of the way. Unclip the 5 wires connected to the display assembly from the motherboard and move them out of the way.
    • Unclip the 5 wires connected to the display assembly from the motherboard and move them out of the way.

  13. Now that the display assembly is disconnected from the main body, lift both of the mounting brackets and remove the display assembly from the main body. Now that the display assembly is disconnected from the main body, lift both of the mounting brackets and remove the display assembly from the main body. Now that the display assembly is disconnected from the main body, lift both of the mounting brackets and remove the display assembly from the main body.
    • Now that the display assembly is disconnected from the main body, lift both of the mounting brackets and remove the display assembly from the main body.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Terelle Montalvo

Membre depuis le 22/10/2018

1 081 Réputation

8 tutoriels rédigés

Équipe

UMass Dartmouth, Team S1-G5, Simcock Fall 2018 Membre de l'équipe UMass Dartmouth, Team S1-G5, Simcock Fall 2018

UMASSD-SIMCOCK-F18S1G5

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 13

30 derniers jours : 48

Total : 376