Réparez vos affaires Communauté Boutique

Lenovo Thinkpad Tablet 1838 Button Replacement

Introduction

Use this guide if either your power or volume buttons have stopped working or if you just want to clean them.

Ce dont vous avez besoin

  1. Lenovo Thinkpad Tablet 1838 Button Replacement, Button: étape 1, image 1 de 1

    • Remove the button on the front of the tablet that has the arrow pointing to the left .

    • You can do this by putting your fingernail or a Spudger underneath the button and pulling up.

    Traduire

  2. Lenovo Thinkpad Tablet 1838 Button Replacement: étape 2, image 1 de 1

    • Remove the 2 screws found under the button you just removed with a size #00 Philips Head Screwdriver.

    Traduire

  3. Lenovo Thinkpad Tablet 1838 Button Replacement: étape 3, image 1 de 1

    • Use a plastic spudger to pry open the screen from the tablet.

    • Work around the perimeter of the tablet going counter-clockwise.

    Traduire

  5. Lenovo Thinkpad Tablet 1838 Button Replacement: étape 4, image 1 de 1

    • Open the tablet screen to the left. (Like opening a book) Making sure not to disconnect any of the wires connecting the screen and tablet.

    Traduire

  6. Lenovo Thinkpad Tablet 1838 Button Replacement: étape 5, image 1 de 1

    • To peel back the ribbon connector, first gently open the white gates.

    • You can do this with a plastic Spudger or your fingernail.

    Traduire

  7. Lenovo Thinkpad Tablet 1838 Button Replacement: étape 6, image 1 de 1

    • Remove the screw that is highlighted.

    • Use a size #00 Philips head screwdriver.

    Traduire

  8. Lenovo Thinkpad Tablet 1838 Button Replacement: étape 7, image 1 de 1

    • Remove the blue motherboard the screw was attached to.

    • Make sure to remove it carefully, so you do not accidentally damage the surrounding parts.

    Traduire

  9. Lenovo Thinkpad Tablet 1838 Button Replacement: étape 8, image 1 de 3 Lenovo Thinkpad Tablet 1838 Button Replacement: étape 8, image 2 de 3 Lenovo Thinkpad Tablet 1838 Button Replacement: étape 8, image 3 de 3

    • To remove the buttons, you need to push the little black tabs towards each other with either your fingernails or plastic spudger.

    • While the tabs are pushed in the buttons should pop out.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Dylan Coleman

Membre depuis le 09/21/18

157 Réputation

1 tutoriel rédigé

Badges: 2

Équipe

University of North Texas, Team S1-G2, Riccardelli Fall 2018 Membre de l'équipe University of North Texas, Team S1-G2, Riccardelli Fall 2018

UNT-RICCARDELLI-F18S1G2

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 339