Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

Users will learn how to remove the bezel from a Lenovo Thinkpad x230.

  1. Before you begin, be sure to turn off your laptop and unplug it from the outlet.
    • Before you begin, be sure to turn off your laptop and unplug it from the outlet.

  2. Flip the computer upside down.
    • Flip the computer upside down.

    • The red rectangle shows the location of the battery.

  3. Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position. Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position. Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position.
    • Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position.

  4. Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer. Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer. Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer.
    • Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer.

  5. Remove the plastic screw covers with an iFixit opening pick.
    • Remove the plastic screw covers with an iFixit opening pick.

  6. Remove the screws (0.4, 0.5 cm) from the bottom corners of the bezel using a Phillips #0 screwdriver. Remove the screws (0.4, 0.5 cm) from the bottom corners of the bezel using a Phillips #0 screwdriver.
    • Remove the screws (0.4, 0.5 cm) from the bottom corners of the bezel using a Phillips #0 screwdriver.

  7. Carefully remove the plastic bezel cover using an iFixit opening pick. Carefully remove the plastic bezel cover using an iFixit opening pick. Carefully remove the plastic bezel cover using an iFixit opening pick.
    • Carefully remove the plastic bezel cover using an iFixit opening pick.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autre(s) ont terminé cette réparation.

Lino Virgen

Membre depuis le 10/10/2016

815 Réputation

3 tutoriels rédigés

Équipe

Texas Tech, Team 6-3, Bennett Fall 2016 Membre de l'équipe Texas Tech, Team 6-3, Bennett Fall 2016

TTU-BENNETT-F16S6G3

4 membres

3 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 43

Total : 4,294