Introduction
To make any repairs on the Lenovo V15-ADA device, you must take the Back Panel Assembly off first. Below are the steps to remove the Back Panel Assembly.
Ce dont vous avez besoin
-
-
Remove the 10 marked screws using a Phillips #1 screwdriver bit.
-
M2.5 × 7 mm, Phillips-head (6) (RED circles)
-
M2.5 × 4 mm, Phillips-head (4) (ORANGE circles)
-
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.