Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the ten 3.3 mm T5 screws from the base cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide an opening tool between the base and back cover and work your way around the entire device to release the back cover.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four 3.5 mm screws around the battery using a Phillips #1 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
Outil utilisé dans cette étape :Tweezers$4.99-
Disconnect the battery by pulling its cable away from the hinge with a pair of tweezers or your fingers.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
Outil utilisé dans cette étape :Tweezers$4.99-
Use tweezers to grab the fan harness.
-
Gently pull the harness to disconnect from motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #1 screwdriver to remove the four screws holding down the fans.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.