Introduction

If the router isn't working and it is established that the antennas are defective this is the guide for you.

  1. Make sure the antennas are in a straight position, not bent, to remove the black casing.
    • Make sure the antennas are in a straight position, not bent, to remove the black casing.

    • Remove the casing by pulling straight up. This will make unscrewing the antenna easier.

    Ajouter un commentaire

  2. Grip antenna at the base and twist counter-clockwise to unscrew it from the device. The base should have a rough feel to it.
    • Grip antenna at the base and twist counter-clockwise to unscrew it from the device. The base should have a rough feel to it.

    Ajouter un commentaire

    • Once antenna is completely detached, obtain the new antenna, and place it on device so the threads line up.

    Ajouter un commentaire

    • Screw antenna onto device by twisting the base of the antenna in a clockwise motion until it is tight and does not turn any further.

    Ajouter un commentaire

    • Place the black casing, which was removed in step 1, back onto the base of the antenna to cover up exposed metal.

    • Repeat these steps for other antenna.

    Ajouter un commentaire

Conclusion

After the repairs are made the device should working.

2 autre(s) ont terminé cette réparation.

Derek Myers

Membre depuis le 04/10/2011

243 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 21-21, Maness Fall 2011 Membre de l'équipe Cal Poly, Team 21-21, Maness Fall 2011

CPSU-MANESS-F11S21G21

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 2,064