Introduction

Before you start to take apart your wireless router, make sure that it is entirely unplugged from any and all connections (power source, Ethernet cable, etc.).

If, after reading through this guide, you are still in need of assistance, please refer back to the device page or the troubleshooting page.

  1. Unfold the antennas straight away from the device.
    • Unfold the antennas straight away from the device.

    Ajouter un commentaire

  2. Remove the black caps from the antennas by pulling them away from the device.
    • Remove the black caps from the antennas by pulling them away from the device.

    Ajouter un commentaire

    • Unscrew each of the antennas from the wireless device.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nina Levine

Membre depuis le 12/10/2011

90 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 17-7, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 17-7, Regan Fall 2011

CPSU-REGAN-F11S17G7

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 2,001