Introduction
If you just can't find out what is wrong with your disco ball, you will probably need to open it to troubleshoot it. This guide will walk you through the steps to do that.
Ce dont vous avez besoin
-
-
-
-
Peel off the piece of metal that is glued to hold the two halves of the base together.
-
-
-
Unscrew the four 10mm Phillips head screws on the bottom of the device.
-
Demander à FixBot
Conclusion
To reassemble your device, follow these instructions in reverse order.
Équipe
Cal Poly, Team 17-3, Forte Winter 2014 Membre de l'équipe Cal Poly, Team 17-3, Forte Winter 2014
CPSU-FORTE-W14S17G3
5 membres
84 tutoriels rédigés
