Introduction

Is something wrong with your disco ball and you need to remove the ball to get to the other parts of your device? This guide will show you how, so you can return to the party!

Pièces

Aucune pièce nécessaire.

  1. Unplug the device to avoid injury.
    • Unplug the device to avoid injury.

    • Turn the device over, so that the base is on top.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Compress the tab by pushing towards the center of the device with a spudger. While compressing the tab, peel the base away from the rotating head. While compressing the tab, peel the base away from the rotating head.
    • Compress the tab by pushing towards the center of the device with a spudger.

    • While compressing the tab, peel the base away from the rotating head.

  4. If the metal brackets come off of the sphere, put them back on the plastic piece as shown in the photo.
    • If the metal brackets come off of the sphere, put them back on the plastic piece as shown in the photo.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Courtney Elliott

Membre depuis le 14/01/2014

354 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 17-3, Forte Winter 2014 Membre de l'équipe Cal Poly, Team 17-3, Forte Winter 2014

CPSU-FORTE-W14S17G3

5 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 608