Introduction

Will your groovy disco ball not turn on? This guide will teach you to remove and replace the switch so you can get back to your partying.

  1. Unplug the device to avoid injury. Use a Phillips head screwdriver to unscrew the single screw.
    • Unplug the device to avoid injury.

    • Use a Phillips head screwdriver to unscrew the single screw.

    • Hold on to the nut from the other side so you do not lose it.

    • Remove the panel that conceals the switch.

  2. %Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Hold on to the red disc with needle nosed pliers, and use the Phillips head screwdriver to remove the disc by pushing down.
    • Hold on to the red disc with needle nosed pliers, and use the Phillips head screwdriver to remove the disc by pushing down.

  4. Remove and replace the white switch. Do not be afraid to pull as this takes a bit of force to remove.
    • Remove and replace the white switch.

      • Do not be afraid to pull as this takes a bit of force to remove.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Courtney Elliott

Membre depuis le 14/01/2014

354 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 17-3, Forte Winter 2014 Membre de l'équipe Cal Poly, Team 17-3, Forte Winter 2014

CPSU-FORTE-W14S17G3

5 membres

7 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 461