Aller au contenu principal

Lite-On LightScribe SHM-165H6S Disc Tray Replacement

Ce dont vous avez besoin

  1. Lite-On LightScribe SHM-165H6S Disc Tray Replacement, Chassis: étape 1, image 1 de 2 Lite-On LightScribe SHM-165H6S Disc Tray Replacement, Chassis: étape 1, image 2 de 2
    • Insert an open paper clip into the small hole on the left side of the faceplate.

    • After the tray opens, extend it fully.

  2. Lite-On LightScribe SHM-165H6S Disc Tray Replacement: étape 2, image 1 de 3 Lite-On LightScribe SHM-165H6S Disc Tray Replacement: étape 2, image 2 de 3 Lite-On LightScribe SHM-165H6S Disc Tray Replacement: étape 2, image 3 de 3
    • Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate.

  3. Lite-On LightScribe SHM-165H6S Disc Tray Replacement: étape 3, image 1 de 1
    • Pull the faceplate away from the main chassis.

  4. Lite-On LightScribe SHM-165H6S Disc Tray Replacement: étape 4, image 1 de 1
    • Unscrew the four 8.5 mm screws on the bottom chassis using a Philips #2 screwdriver.

  5. Lite-On LightScribe SHM-165H6S Disc Tray Replacement: étape 5, image 1 de 2 Lite-On LightScribe SHM-165H6S Disc Tray Replacement: étape 5, image 2 de 2
    • Lift the top and bottom chassis straight up in order to remove them.

  6. Lite-On LightScribe SHM-165H6S Disc Tray Replacement, Disc Tray: étape 6, image 1 de 3 Lite-On LightScribe SHM-165H6S Disc Tray Replacement, Disc Tray: étape 6, image 2 de 3 Lite-On LightScribe SHM-165H6S Disc Tray Replacement, Disc Tray: étape 6, image 3 de 3
    • Extend the tray fully.

    • Push the tab on the right side to the left.

    • Push the tab on the left side to the left.

    • Remove the tray carefully.

  7. Lite-On LightScribe SHM-165H6S Disc Tray Replacement: étape 7, image 1 de 3 Lite-On LightScribe SHM-165H6S Disc Tray Replacement: étape 7, image 2 de 3 Lite-On LightScribe SHM-165H6S Disc Tray Replacement: étape 7, image 3 de 3
    • Guide the replacement tray under the beige tabs.

    • Make sure the grey piece is slid to the right, so the grey nob is under the right-hand groove of the tray.

    • Check to see that the tray extends and closes smoothly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

James Biggs

Membre depuis le 10/12/11

596 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 6-5, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 6-5, Regan Fall 2011

CPSU-REGAN-F11S6G5

2 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 15

Total : 4,103