Introduction
The secondary button is an important part of your controller. Your secondary button may become sticky, stuck or damaged over time. This part can be easily replaced and cleaned.
Ce dont vous avez besoin
-
-
Remove the three 2 mm screws on the right panel.
-
Remove the right cover panel
-
Open the joystick
-
-
-
-
Unscrew the two silver 1 mm screws
-
Remove the circuit board
-
Push the purple secondary button cap out from its slot
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.