Aller au contenu principal

Logitech G29 Driving Force Paddle Assembly Replacement

Ce dont vous avez besoin

  1. Logitech G29 Driving Force Paddle Assembly Replacement, Paddle Assembly: étape 1, image 1 de 1
    • Remove the six 32mm long 4mm allen screws from the faceplate of the steering wheel

  2. Logitech G29 Driving Force Paddle Assembly Replacement: étape 2, image 1 de 1
    • Now, Remove the six 10mm long #00 Phillips head screws from the back of the steering wheel.

    • Gently lift off the steering wheel from the hub.

  3. Logitech G29 Driving Force Paddle Assembly Replacement: étape 3, image 1 de 1
    • Carefully unplug the wire connector from the motherboard of the steering wheel

  4. Logitech G29 Driving Force Paddle Assembly Replacement: étape 4, image 1 de 1
    • Using the #1 Phillips head screwdriver remove the three 30mm long screws that are behind the steering wheel.

  5. Logitech G29 Driving Force Paddle Assembly Replacement: étape 5, image 1 de 1
    • Gently pull the paddle assembly off from the base of the device and carefully thread the connector through the hole in the center.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Isaac Seagle

Membre depuis le 09/16/22

391 Réputation

2 tutoriels rédigés

Équipe

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 7

7 derniers jours : 40

30 derniers jours : 166

Total : 3,600