Logitech G602 Side Motherboard Replacement

Introduction

This guide will walk you through taking apart your Logitech G602 and replacing the side motherboard. You'll need a Phillips #00 screwdriver and a couple plastic opening tools to complete this guide.

Ce dont vous avez besoin

Étape 1 Side Motherboard

Logitech G602 Side Motherboard Replacement, Side Motherboard: étape 1, image 1 de 1

Use a blue spudger to pry all 4 mice feet from the bottom of the mouse.

Modifier

Étape 2

Use a Phillips #00 screwdriver to unscrew all 6 screws (3x5mm) from underneath the mice feet.

Modifier

Étape 3

Use the blue spudger to prop open the bottom battery port.
Remove the AA batteries.

Modifier

Étape 4

Lift the top of the mouse from the base of the mouse (separate the mouse in half) to expose the internal hardware.

Modifier

Étape 5

Outil utilisé dans cette étape :

Tweezers

$4.99

J'achète

Use tweezers to grip and pull the white ribbon cable from the motherboard.

Modifier

Étape 6

Use a Phillips #00 screwdriver to remove both screws (3x5mm ) from above the side motherboard.

Modifier

Étape 7

Use a Phillips #00 screwdriver and unscrew both screws from the side motherboard.
We used a set of pliers and a Phillips #00 screw bit because the screwdriver couldn't fit into the side of the device.

Modifier