Réparez vos affaires Communauté Boutique

Logitech G910 Keyboard Key Replacement

Introduction

This guide will help you remove a key from the keyboard. You'll want to use a plastic or metal spudger to remove the keys from the keyboard.

Ce dont vous avez besoin

  1. Logitech G910 Keyboard Key Replacement, Key: étape 1, image 1 de 1

    • Unplug the keyboard cord from the computer.

    Traduire

  2. Logitech G910 Keyboard Key Replacement: étape 2, image 1 de 2 Logitech G910 Keyboard Key Replacement: étape 2, image 2 de 2

    • Turn the keyboard over and remove all the screws from the back.

    Traduire

  4. Logitech G910 Keyboard Key Replacement: étape 3, image 1 de 1

    • Turn the keyboard back and remove the screws from the front.

    Traduire

  5. Logitech G910 Keyboard Key Replacement: étape 4, image 1 de 1

    • Using a metal spudger, gently slide it under the cover. Use your hand to add more pressure.

    • Be careful to not give too much pressure that could break the keyboard

    Traduire

  6. Logitech G910 Keyboard Key Replacement: étape 5, image 1 de 1

    • Gently remove the key button from the device.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autres ont terminé cette réparation.

13 commentaires

I am sorry, but why did you wrote a tutorial and describe how to open up G910 (and lose the warranty along the way) just to take of the keyCAP?

Keycap can be removed in a matter of seconds with use of $0.99 keycap removal tool

https://www.ebay.com/itm/Keyboard-Key-Ke...

heggathestrasni - Réponse

It’s not just the Key Cap, you can remove the mechanical switch too. I have a busted G910 and I’ve been wanting to replace the switches for a while now.

Wildcard001 -

dude same, I have a few broken switches on mine that I'm keeping held together with some wadded up paper. the 9 key is completely gone sadly.

Shady Hero -

Rofl, you don’t need to do steps 1-4, literally jusst do 5 if you are replacing the keycap lmao

rob.chan - Réponse

I think step 3 and 4 are in the wrong order, you can’t get to the screws until you get that face-plate off

Brett Yoakum - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 21

7 derniers jours : 117

30 derniers jours : 534

Total : 59,747