Réparez vos affaires Communauté Boutique

Logitech Harmony 900 Button Pad Replacement

Introduction

This guide shows how to replace the buttons on the Logitech Harmony 900. This is useful for if your buttons get stuck or broken.

Ce dont vous avez besoin

  1. Logitech Harmony 900 Button Pad Replacement, Battery: étape 1, image 1 de 2 Logitech Harmony 900 Button Pad Replacement, Battery: étape 1, image 2 de 2

    • Press the oval shaped button on the lower back of the remote to release the battery cover.

    • While pressing the button, remove the cover.

    Traduire

  2. Logitech Harmony 900 Button Pad Replacement: étape 2, image 1 de 2 Logitech Harmony 900 Button Pad Replacement: étape 2, image 2 de 2

    • Push the battery in, pull it up, and slide it out.

    Traduire

  3. Logitech Harmony 900 Button Pad Replacement, Motherboard: étape 3, image 1 de 1
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • Using tweezers, peel off the sticker located under the battery cover to reveal two screws.

    Traduire

  4. Logitech Harmony 900 Button Pad Replacement: étape 4, image 1 de 2 Logitech Harmony 900 Button Pad Replacement: étape 4, image 2 de 2

    • Locate and unscrew the four 50mm screws using the Philips #0 screwdriver.

    Traduire

  6. Logitech Harmony 900 Button Pad Replacement: étape 5, image 1 de 1

    • Use a credit card to pry the black, plastic, back cover off of the device.

    • You may need to get the process started with a metal prying tool before you start using the credit card.

    Traduire

  7. Logitech Harmony 900 Button Pad Replacement: étape 6, image 1 de 2 Logitech Harmony 900 Button Pad Replacement: étape 6, image 2 de 2

    • Locate the three 50mm screws on the back of the remote and remove them using the Phillips #0 screwdriver.

    Traduire

  8. Logitech Harmony 900 Button Pad Replacement: étape 7, image 1 de 2 Logitech Harmony 900 Button Pad Replacement: étape 7, image 2 de 2

    • Pry the black, front face of the remote from the back silver part by inserting a credit card in between and sliding down.

    • Again, you may need to use a metal prying tool to get the separation started.

    Traduire

  9. Logitech Harmony 900 Button Pad Replacement: étape 8, image 1 de 2 Logitech Harmony 900 Button Pad Replacement: étape 8, image 2 de 2

    • When you look at the circuit board, you should see a ribbon attaching the board to the plastic casing.

    • A little lever is holding the ribbon in place. Lift the lever with your nail or a 2.5mm flat-head screwdriver. Move the ribbon away from the circuit board.

    Traduire

  10. Logitech Harmony 900 Button Pad Replacement: étape 9, image 1 de 2 Logitech Harmony 900 Button Pad Replacement: étape 9, image 2 de 2

    • Using the Philips #0 screwdriver, remove the three 50mm screws from the circuit board.

    Traduire

  11. Logitech Harmony 900 Button Pad Replacement: étape 10, image 1 de 1

    • Using your hands, carefully separate the motherboard from the rest of the remote.

    Traduire

  12. Logitech Harmony 900 Button Pad Replacement, Button Pad: étape 11, image 1 de 2 Logitech Harmony 900 Button Pad Replacement, Button Pad: étape 11, image 2 de 2

    • Peel off the button pads from the device frame.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Tyler Hanks

Membre depuis le 09/25/17

442 Réputation

3 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

USF Tampa, Team S4-G5, Eyestone Fall 2017 Membre de l'équipe USF Tampa, Team S4-G5, Eyestone Fall 2017

USFT-EYESTONE-F17S4G5

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 14

Total : 820