Logitech K400r Wireless Keyboard Disassembly & Cleaning

Introduction

This guide will cover the disassembly and cleaning of the Logitech K400r wireless keyboard. Before you begin, ensure that you have a small Phillips #0 screwdriver, compressed air, paper towels, and cotton swabs. For you safety, ensure that the device is turned off or the batteries are removed before disassembly.

Ce dont vous avez besoin

Étape 1 Logitech K400r Wireless Keyboard Disassembly & Cleaning

Logitech K400r Wireless Keyboard Disassembly & Cleaning, Logitech K400r Wireless Keyboard Disassembly & Cleaning: étape 1, image 1 de 1

Use a small Phillips head screwdriver to unscrew all visible screws on the back of the keyboard.
Keep all screws in a safe place for easy reassembly.
Ensure the keyboard is shut off before disassembly.

Traduire

Étape 2

Remove the battery port so that the batteries are exposed and take them out.
Unscrew the screw that is located in the battery port.

Traduire

Étape 3

Remove the two rubber pieces off the top of the keyboard.
Unscrew screws located under the rubber pieces.

Traduire

Étape 4

Unscrew the screws located under the label in the center of the back of the keyboard.

Traduire

Étape 5

Once you have removed all screws from the exterior, the keyboard should be able to split open and come apart.
Carefully pry open the keyboard. You can use your screwdriver or any prying tool.

Traduire

Étape 6

Remove the key matrix, which is soft and should be clear or white.
Using a dry cloth, lightly wipe off the key matrix.

Traduire

Étape 7

Using a dry cotton swab, lightly dust off the mousepad and area around the keys on the outside of the board.

Traduire

Étape 8

Using compressed air, dust in between the key switches and inside the circuit grid.

Traduire

Étape 9 Reassembly

After you have cleaned all components of your keyboard, place the key matrix, key switchboard, and circuit grid back inside the keyboard.
Place all screws back into the exterior of the keyboard and screw them in tightly.
Place batteries back in battery compartment and close the battery port.
Keyboard is reassembled!