Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Desktop Computer Speakers
-
Weight: 1lb
-
Height: 6.22 in
-
Width: 2.67 in
-
Depth: 2.51 in
-
Power: 2.2W (RMS)
-
RCA and 3.5mm jack inputs
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the speaker grills using a thin, flat object such as a flathead screwdriver.
-
Insert the tool where the grill connects to the chassis just above the logitech logo.
-
Pry upwards until the grill releases
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert the flathead screwdriver in the seam between the speaker chassis.
-
Use force to jam the flathead screwdriver into the chassis.
-
Drag the screwdriver around the chassis until the two sides separate.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a phillips head screwdriver, remove the screws holding the PCB, transformer, and speakers to the chassis.
-
Pull the PCB, transformer, and speakers from the chassis.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The driver board contains several components
-
Stereo Amplifier: TEA2025B
-
5mm LED power indicator
-
Potentiometer and on/off switch
-
Decoupling, bypass, and AC coupling capcaitors
-
3 commentaires
I took mine apart, only the Speaker that contains the On/Off Volume— Potentiometer. That Speaker fell off my table and hit the floor landing on the Volume control knob, since then the Speakers do not work unless I insert something to keep pressure on the Volume Control’s shaft. Is it possible to obtain and replace the potentiometer/On/Off Switch…?
Yeah. Same here. I was blown away of the fact that there are no trasistors. Zero. None.
There is one IC chip, SC1863. But I cant find info on it.
Actually I just want to use it as a portable usb powered guitar amp. But I cant get my head around no transistors in it. Weird, huh?
