Réparez vos affaires Communauté Boutique

Logitech VX Nano Wireless Mouse Opening Procedure

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Prerequisite only guide to open the Logitech VX Nano Wireless Mouse.

Ce dont vous avez besoin

  1. Logitech VX Nano Wireless Mouse Opening Procedure, Remove batteries and nano receiver: étape 1, image 1 de 2 Logitech VX Nano Wireless Mouse Opening Procedure, Remove batteries and nano receiver: étape 1, image 2 de 2

    • Pull down on the battery release tab to remove the battery cover.

    • Remove battery cover.

    Modifier

  2. Logitech VX Nano Wireless Mouse Opening Procedure: étape 2, image 1 de 2 Logitech VX Nano Wireless Mouse Opening Procedure: étape 2, image 2 de 2

    • Pull the battery release tab away from the mouse so the two AA batteries come out.

    Modifier

  3. Logitech VX Nano Wireless Mouse Opening Procedure: étape 3, image 1 de 1

    • If the Nano Receiver is still in the mouse and not in your computer, remove it by pushing on the bright orange button. It should pop right out!

    Modifier

  5. Logitech VX Nano Wireless Mouse Opening Procedure, Open the mouse: étape 4, image 1 de 1

    • Find and remove the screws at the bottom of the battery compartment:

    • Two 6 mm Phillips #1 screws

    • When removing these two screws, it can be helpful to hold the plastic battery tab out of the way of your screwdriver.

    Modifier

  6. Logitech VX Nano Wireless Mouse Opening Procedure: étape 5, image 1 de 2 Logitech VX Nano Wireless Mouse Opening Procedure: étape 5, image 2 de 2

    • Use an opening pick to get underneath the corner of one of the adhesive skates.

    • As you start to remove the skate, make sure that the opening pick is underneath the entire adhesive pad—otherwise you run the risk of splitting the pad in half.

    • Continue to push the opening pick between the adhesive and the mouse case, slowly working the adhesive away from the case.

    • Repeat this same process for the two other skates.

    • Remove any old adhesive residue before applying new mouse skates.

    Modifier

  7. Logitech VX Nano Wireless Mouse Opening Procedure: étape 6, image 1 de 1

    • Remove the screws from the backside of the mouse:

    • Three 6 mm Phillips #1 screws

    • The top shell and bottom case are no longer connected. Keep the mouse steady so you can carefully remove the upper shell in the next step.

    Modifier

  8. Logitech VX Nano Wireless Mouse Opening Procedure: étape 7, image 1 de 2 Logitech VX Nano Wireless Mouse Opening Procedure: étape 7, image 2 de 2

    • Carefully separate the top plastic shell from the bottom case.

    • Remove the top shell.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

Carsten Frauenheim

Membre depuis le 03/10/20

113 672 Réputation

338 tutoriels rédigés

Badges: 40

+ 37 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

135 membres

16 817 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 38