Introduction

This guide will lead you in desoldering the connections between the camera and the motherboard.

  1. Remove the two 8mm Phillips#0 screws on the back cover.
    • Remove the two 8mm Phillips#0 screws on the back cover.

    • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

    Ajouter un commentaire

  2. Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover.
    • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

    Ajouter un commentaire

  3. Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    • Remove the two 8mm Phillips#0 screws on the back of the motherboard.

    Ajouter un commentaire

    • Remove the camera from the motherboard by desoldering the two connections as shown.

    • Follow this link to learn how to properly solder and desolder your parts.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

nieko

Membre depuis le 18/04/2013

63 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 12-34, Amido Spring 2013 Membre de l'équipe Cal Poly, Team 12-34, Amido Spring 2013

CPSU-AMIDO-S13S12G34

4 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 12

Total : 1,635