Introduction

This guide shows how to remove the battery cover and battery of this device. It shows the location of the screw and where to insert the spudger.

Remove the 5.0mm screw using the Phillips #0 head screwdriver.
  • Remove the 5.0mm screw using the Phillips #0 head screwdriver.

Ajouter un commentaire

Insert metal spudger as shown in the picture. Move spudger along  to the other side until both snaps come loose.
  • Insert metal spudger as shown in the picture. Move spudger along to the other side until both snaps come loose.

Ajouter un commentaire

  • Picture shows the removed battery cover.

Ajouter un commentaire

  • Slide the battery out by pulling on one of two plastics tabs.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Yancey Crase

Membre depuis le 26/03/2018

217 Réputation

2 tutoriels rédigés

Équipe

IUPUI, Team S1-G4, Harley Spring 2018 Membre de l'équipe IUPUI, Team S1-G4, Harley Spring 2018

IUPUI-HARLEY-S18S1G4

7 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 52