Aller au contenu principal

MAGNAVOX MDV2300 Power Cord Replacement

Ce dont vous avez besoin

  1. MAGNAVOX MDV2300 Power Cord Replacement, Power Cord: étape 1, image 1 de 1
    • Make sure the device is unplugged from the wall.

  2. MAGNAVOX MDV2300 Power Cord Replacement: étape 2, image 1 de 1
    • Unscrew the two screws that hold together the top panel.

  3. MAGNAVOX MDV2300 Power Cord Replacement: étape 3, image 1 de 1
    • Remove the top panel.

  4. MAGNAVOX MDV2300 Power Cord Replacement: étape 4, image 1 de 1
  5. MAGNAVOX MDV2300 Power Cord Replacement: étape 5, image 1 de 2 MAGNAVOX MDV2300 Power Cord Replacement: étape 5, image 2 de 2
    • Remove disc drive by unscrewing the 2 screws that hold the drive in place.

  6. MAGNAVOX MDV2300 Power Cord Replacement: étape 6, image 1 de 1
    • Identify the power cord.

    • The cord must either be too short or torn to warrant replacement.

  7. MAGNAVOX MDV2300 Power Cord Replacement: étape 7, image 1 de 1
    • Cut the old wire out from the chip.

    • Attach the new wire into the housing.

    • Line up new wire with the appropriate holes and solder to board.

    • The white wire will be your neutral and the black wire will be your negative. View link of how to solder in order to replace the power cord. http://www.instructables.com/id/How-to-s...

Conclusion

After soldering, let cool and then reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Justin

Membre depuis le 01/21/15

298 Réputation

2 tutoriels rédigés

Équipe

Penn State, Team 1-41, Kaschak Winter 2015 Membre de l'équipe Penn State, Team 1-41, Kaschak Winter 2015

PSU-KASCHAK-W15S1G41

4 membres

2 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 14

Total : 520