Introduction

This guide will show a user how to replace the back cover on the MSI Apache Pro 004 laptop.

Pièces

Aucune pièce nécessaire.

Start with the bottom of the laptop facing up.
  • Start with the bottom of the laptop facing up.

Ajouter un commentaire

Remove the 15 screws from the bottom of the laptop with a PH1 screwdriver.
  • Remove the 15 screws from the bottom of the laptop with a PH1 screwdriver.

  • Remove the bottom plate

  • Keep track of all the screws and which slot they came from, as they slightly differ. We recommend this system: lay out on a piece of paper and pretending the paper is the device. Place the screws on the paper approximately where they would go

Ajouter un commentaire

  • Remove the screw holding down the battery with a PH1 screwdriver.

  • Pull out the battery.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Arian Arana

Membre depuis le 13/02/2018

97 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team S15-G5, Boczar Spring 2018 Membre de l'équipe USF Tampa, Team S15-G5, Boczar Spring 2018

USFT-BOCZAR-S18S15G5

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 38

Total : 110