Réparez vos affaires Communauté Boutique

MSI GP60 2PE Leopard Wireless Card Replacement

Introduction

Is your wireless card not working? Here's a guide to replace it. Make sure you follow each step accordingly and carefully replace the wireless card.

Ce dont vous avez besoin

  1. MSI GP60 2PE Leopard Wireless Card Replacement, Battery: étape 1, image 1 de 1

    • Flip MSI GP60 2PE Leopard, so that the back is facing up.

    Traduire

  2. MSI GP60 2PE Leopard Wireless Card Replacement: étape 2, image 1 de 1

    • Find the unlock tab located on the upper right side of the device, then slide it to the right.

    Traduire

  3. MSI GP60 2PE Leopard Wireless Card Replacement: étape 3, image 1 de 3 MSI GP60 2PE Leopard Wireless Card Replacement: étape 3, image 2 de 3 MSI GP60 2PE Leopard Wireless Card Replacement: étape 3, image 3 de 3

    • Slide and hold the release tab on the left side of the battery, so that you can remove the battery.

    Traduire

  4. MSI GP60 2PE Leopard Wireless Card Replacement: étape 4, image 1 de 3 MSI GP60 2PE Leopard Wireless Card Replacement: étape 4, image 2 de 3 MSI GP60 2PE Leopard Wireless Card Replacement: étape 4, image 3 de 3

    • While holding the release tab, remove the battery slowly.

    Traduire

  6. MSI GP60 2PE Leopard Wireless Card Replacement, Back Panel: étape 5, image 1 de 1

    • Flip the device over so the back is facing up.

    Traduire

  7. MSI GP60 2PE Leopard Wireless Card Replacement: étape 6, image 1 de 2 MSI GP60 2PE Leopard Wireless Card Replacement: étape 6, image 2 de 2

    • Remove the four 5mm screws from the back of the device using a Phillips #00 screwdriver.

    • There is a screw located under the battery; lift the battery up to access it.

    Traduire

  8. MSI GP60 2PE Leopard Wireless Card Replacement: étape 7, image 1 de 2 MSI GP60 2PE Leopard Wireless Card Replacement: étape 7, image 2 de 2

    • Once all four screws are removed, lift the back off.

    Traduire

  9. MSI GP60 2PE Leopard Wireless Card Replacement, Wireless Card: étape 8, image 1 de 1

    • Locate the wireless card.

    Traduire

  10. MSI GP60 2PE Leopard Wireless Card Replacement: étape 9, image 1 de 1

    • Using a Phillips #00 screwdriver, remove the one 2 mm screw that is holding the wireless card in place.

    Traduire

  11. MSI GP60 2PE Leopard Wireless Card Replacement: étape 10, image 1 de 1

    • Carefully remove the wireless card.

    • Pay close attention to the two wires attached to wireless card.

    Traduire

  12. MSI GP60 2PE Leopard Wireless Card Replacement: étape 11, image 1 de 2 MSI GP60 2PE Leopard Wireless Card Replacement: étape 11, image 2 de 2

    • Remove the wires connecting to the wireless card by pinching around the base where they connect, then carefully disconnect them.

    • The wires should come off fairly easily.

    • Avoid yanking or pulling too hard. This can result in the wires breaking.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Zoey Calcagno

Membre depuis le 10/04/18

672 Réputation

5 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Linn Benton Community College, Team S1-G4, Karnes Fall 2018 Membre de l'équipe Linn Benton Community College, Team S1-G4, Karnes Fall 2018

LBCC-KARNES-F18S1G4

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 12

Total : 1,310