Aller au contenu principal

Introduction

Prerequisite only

Pièces

Aucune pièce spécifiée.

  1. Remove the two 12 mm T6 screws from the fan.
    • Remove the two 12 mm T6 screws from the fan.

    • Loosen the 27 mm T6 captive screw.

  2. The fan connector is trapped under the edge of the fan and cannot be disconnected until the fan is moved. Do not attempt to remove the fan entirely. Lift the fan straight up to free the captive screw from its hole in the logic board.
    • The fan connector is trapped under the edge of the fan and cannot be disconnected until the fan is moved.

    • Do not attempt to remove the fan entirely.

    • Lift the fan straight up to free the captive screw from its hole in the logic board.

    • Pull the fan away from the SSD until you can easily access the fan connector.

  3. Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board. Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board.
    • Use the point of a spudger to lift the fan connector straight up out of its socket on the logic board.

  4. Remove the fan from the Mac mini.
    • Remove the fan from the Mac mini.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Membre depuis le 18/10/2012

441 114 Réputation

547 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

137 membres

16 772 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 187