Introduction
Prerequisite only.
Ce dont vous avez besoin
-
-
Remove the 2.6 mm T6 screw securing the SATA cable connector bracket.
-
-
-
Outil utilisé dans cette étape :Mac mini Logic Board Removal Tool$4.99
-
Insert the Mac mini Logic Board Removal Tool into the two holes highlighted in red. Be sure the rods make contact with the case under the logic board before proceeding.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.