Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
-
Éteignez votre Mac mini, déconnectez tous les câbles et retournez-le.
-
Insérez la spatule Jimmy dans la jointure entre l'aluminium du couvercle supérieur e de la partie inférieure en plastique.
-
La spatule doit s'enfoncer d'environ 9 mm.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Keep working around the perimeter, freeing the clips along the final edge.
-
-
-
-
Exercez une légère pression sur les deux clips de fixation et soulevez l'antenne AirPort pour la libérer.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the single Phillips screw securing the audio board to the bottom housing.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a spudger to depress the small metal finger (shown in red) while lifting the audio board with your thumb.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the free end of the audio board slightly and pull it away from the port side of the bottom housing.
-
Annulation : je n'ai pas terminé ce tutoriel.
11 autres ont terminé cette réparation.
Un commentaire
This is an excellent tutorial. I didn't have to replace the audio board, just re-seat the ribbon cable. Thanks!
Gary O'Brien
Photographer
Charlotte, NC