Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Introduction
Utilisez ce tutoriel pour démonter votre MacBook Air 11" Début 2015 pour une réparation ou un remplacement du trackpad.
Ce dont vous avez besoin
-
Outil utilisé dans cette étape :P5 Pentalobe Screwdriver Retina MacBook Pro and Air$5.99
-
Retirez les dix vis suivantes :
-
Deux vis pentalobes 8 mm 5-points
-
Huit vis pentalobes 2.5 mm 5-points
-
-
-
Utilisez l'extrémité plate d'une spatule (spudger) pour faire levier sur les deux côtés courts du connecteur de la batterie afin de le déconnecter de sa prise sur la carte mère.
-
Repliez légèrement la nappe de la batterie pour l'éloigner de la carte mère pour éviter que le connecteur ne se rabatte accidentellement et n'entre en contact avec sa prise.
-
-
-
-
Retirez les cinq vis suivantes fixant la batterie au boîtier supérieur :
-
deux vis Torx T5 de 5,2 mm
-
une vis Torx T5 de 6 mm
-
deux vis Torx de 2,6 mm
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the point of a spudger to lift the ZIF connector retaining flap on the trackpad data cable.
-
Gently slide the ribbon cable out of the ZIF connector.
-
Adjust, but do not remove the T5 Trackpad Sensitivity Screw to change the trackpad's depth sensitivity.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With one hand, push the keyboard ribbon cable in slightly to access the ZIF connector beneath it.
-
Use a spudger to flip up the retaining flap.
-
Gently slide the cable out of the connector.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the six 1.5 mm Phillips #00 screws holding the trackpad in place.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Open the device about 10 degrees.
-
While holding the bottom of the trackpad, press up on the side of the trackpad closest to the logic board to free it from the upper case.
-
Remove the trackpad from the device.
-
Pour remonter votre appareil, suivez les étapes dans l'ordre inverse.
Pour remonter votre appareil, suivez les étapes dans l'ordre inverse.
Annulation : je n'ai pas terminé ce tutoriel.
9 autres ont terminé cette réparation.
Merci à ces traducteurs :
100%
Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›
3 commentaires
Hi. After my trackpad “click” started failing (it wouldn’t physically feel like a click when pressed and it wouldn’t respond unless you pushed hard and in certain areas) I went through the whole above replacement process with a trackpad I bought off of Amazon. The new trackpad has a better click on the right hand side but the left hand side is not working still.
Could it be that the new trackpad I got also doesn’t work? The reviews on Amazon indicated that the trackpads from this seller sometimes also failed.
Or is there another problem? I noticed there are two black rubber pads (made of a thin foam) that are between the base of the trackpad and the body of the macbook frame, and that in my computer they are worn/frayed. Could this be the problem?
If anyone has any knowledge about this, or advice about how to go about with this repair and trying different things, I would appreciate your help.
I’d love to know the answers to the above questions before I take mine apart!
this was very easy thanks