Réparez vos affaires Communauté Boutique

MacBook Air 13" Early 2015 Display Assembly Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Prereq for upper case (logic board is removed)

Ce dont vous avez besoin

  1. MacBook Air 13" Early 2015 Display Assembly Replacement, Display Assembly: étape 1, image 1 de 1

    • Remove the inner two 5.6 mm T8 Torx screws securing the right display hinge to the upper case.

    • Leaving the third screw in place for now will aid in rest of the procedure.

    Traduire

  2. MacBook Air 13" Early 2015 Display Assembly Replacement: étape 2, image 1 de 1

    • Open the display so that it is perpendicular to the upper case and place it on a table as shown.

    Traduire

  4. MacBook Air 13" Early 2015 Display Assembly Replacement: étape 3, image 1 de 1

    • While holding the Air steady, remove the remaining 5.6 mm T8 Torx screw from the display bracket.

    Traduire

  5. MacBook Air 13" Early 2015 Display Assembly Replacement: étape 4, image 1 de 1

    • Flip the computer over so the last display screw is more easily accesible.

    • Before removing the final display screw, be sure to hold the display and upper case steady with your other hand. Failure to do so may allow the components to fall onto the table, causing potentially expensive damage.

    • Remove the last 5.6 mm T8 Torx screw securing the display to the upper case.

    Traduire

  6. MacBook Air 13" Early 2015 Display Assembly Replacement: étape 5, image 1 de 3 MacBook Air 13" Early 2015 Display Assembly Replacement: étape 5, image 2 de 3 MacBook Air 13" Early 2015 Display Assembly Replacement: étape 5, image 3 de 3

    • Open the Air slowly until the hinges slide out of their notches.

    • The antenna cables may still be routed through a channel in the upper case. Make sure the cables don't get snagged as you remove the display.

    • Once the two display hinges have cleared the upper case, remove the display and set it aside.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

iRobot

Membre depuis le 09/24/09

1 Réputation

636 tutoriels rédigés

Badges: 36

+ 33 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 79