Réparez vos affaires Communauté Boutique

MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Prereq to remove the logic board

Ce dont vous avez besoin

  1. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement, Logic Board Assembly: étape 1, image 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement, Logic Board Assembly: étape 1, image 2 de 2

    • Remove the two 2.1 mm T5 Torx screws securing the I/O board cable bracket to the logic board.

    • Remove the I/O board cable bracket.

    Traduire

  2. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 2, image 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 2, image 2 de 2

    • Use the flat end of a spudger to pop the I/O board connector straight up off its socket on the logic board.

    • Be careful to only pry up on the I/O board cable, not on the socket itself or you risk damaging your logic board.

    Traduire

  3. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 3, image 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 3, image 2 de 2

    • Lift the logic board end of the I/O board cable straight up to bend it out of the way.

    • To avoid damage to the cable, fold only at the bend in the I/O board end of the cable.

    Traduire

  4. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 4, image 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 4, image 2 de 2

    • Use the tip of a spudger to lift the right speaker connector straight up out of its socket on the logic board.

    Traduire

  5. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 5, image 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 5, image 2 de 2

    • With the tip of a spudger, push on either side of the I/O board connector to walk it out of its socket on the logic board.

    Traduire

  6. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 6, image 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 6, image 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 6, image 3 de 3

    • Use the flat end of a spudger to disconnect the keyboard backlight cable and bend it up out of the way of the logic board.

    Traduire

  8. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 7, image 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 7, image 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 7, image 3 de 3

    • Grab the black plastic tab to flip the display cable connector open and pull it straight out of its socket on the logic board.

    Traduire

  9. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 8, image 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 8, image 2 de 2

    • Carefully pull the DC-In board connector straight out of its socket on the logic board.

    Traduire

  10. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 9, image 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 9, image 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 9, image 3 de 3

    • Wedge the flat end of a spudger under the left speaker cable near the connector and lift it straight up out of its socket and fold it out of the way.

    Traduire

  11. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 10, image 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 10, image 2 de 2

    • If necessary, peel back any tape covering the microphone cable ZIF connector.

    Traduire

  12. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 11, image 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 11, image 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 11, image 3 de 3

    • Use the tip of a spudger to flip the retaining tab on the microphone cable ZIF connector.

    • Pull the microphone cable out of its socket on the logic board.

    Traduire

  13. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 12, image 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 12, image 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 12, image 3 de 3

    • If necessary, peel back any tape covering the keyboard cable connector.

    • Use the tip of a spudger to flip the retaining tab on the ZIF connector.

    Traduire

  14. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 13, image 1 de 2 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 13, image 2 de 2

    • Pull the keyboard cable straight out of its ZIF socket on the logic board.

    Traduire

  15. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 14, image 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 14, image 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 14, image 3 de 3

    • Use the flat end of a spudger to pop the trackpad connector straight up off its socket on the logic board.

    • Fold the cable out back over the battery to clear the way for the logic board.

    Traduire

  16. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 15, image 1 de 1

    • Remove the five 3.5 mm T5 Torx screws securing the logic board to the upper case.

    Traduire

  17. MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 16, image 1 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 16, image 2 de 3 MacBook Pro 13" Retina Display Early 2015 Logic Board Assembly Replacement: étape 16, image 3 de 3

    • Lift the processor end of the logic board up slightly and pull it toward the fan recess to free the ports from the edge of the upper case.

    • Remove the logic board.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

Sam Goldheart

Membre depuis le 10/18/12

465 647 Réputation

538 tutoriels rédigés

Badges: 48

+ 45 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

135 membres

16 732 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 175