Aller au contenu principal

MacBook Pro 13" Retina Display Late 2012 AirPort Board Assembly Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. MacBook Pro 13" Retina Display Late 2012 AirPort Board Assembly Replacement, AirPort Board Assembly: étape 1, image 1 de 1
    • Remove the single 2.7 mm T5 Torx screw securing the AirPort board to the I/O board.

  2. MacBook Pro 13" Retina Display Late 2012 AirPort Board Assembly Replacement: étape 2, image 1 de 3 MacBook Pro 13" Retina Display Late 2012 AirPort Board Assembly Replacement: étape 2, image 2 de 3 MacBook Pro 13" Retina Display Late 2012 AirPort Board Assembly Replacement: étape 2, image 3 de 3
    • Use the flat end of a spudger to pry and disconnect the three antenna cable connectors from the AirPort board.

    • The three cables are coded with black sleeves of different lengths. During reassembly:

    • Connect the long-sleeved cable to the center socket.

    • The short-sleeved cable connects next to the screw.

    • The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.

  3. MacBook Pro 13" Retina Display Late 2012 AirPort Board Assembly Replacement: étape 3, image 1 de 2 MacBook Pro 13" Retina Display Late 2012 AirPort Board Assembly Replacement: étape 3, image 2 de 2
    • Move the antenna cables aside, clear of the AirPort board.

  4. MacBook Pro 13" Retina Display Late 2012 AirPort Board Assembly Replacement: étape 4, image 1 de 2 MacBook Pro 13" Retina Display Late 2012 AirPort Board Assembly Replacement: étape 4, image 2 de 2
    • Pull the AirPort board straight out of its socket on the I/O board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 41