Aller au contenu principal

MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement, Battery Connector: étape 1, image 1 de 1
    • Remove the plastic cover adhered to the battery contact board.

  2. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: étape 2, image 1 de 1
    • Remove the following screws securing the battery connector board to the logic board:

    • Two 2.8 mm T6 Torx screws

    • One 7.0 mm T6 Torx shouldered screw

  3. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: étape 3, image 1 de 2 MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: étape 3, image 2 de 2
    • Use tweezers to remove the small plastic cover located near the bottom right of the battery connector board.

  4. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: étape 4, image 1 de 1
    • Remove the wide head 6.4 mm T6 Torx screw securing the battery connector to the logic board assembly.

  5. MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: étape 5, image 1 de 2 MacBook Pro 13" Retina Display Late 2012 Battery Connector Replacement: étape 5, image 2 de 2
    • Carefully lift the battery connector board up off the logic board.

    • It is recommended to bend the battery cables just slightly, to keep the board suspended up above the logic board and out of the way.

    • Do not fold the board completely over, or crease the cables, as this may damage the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 251