Réparez vos affaires Communauté Boutique

MacBook Pro 13" Unibody Early 2011 Lower Case Replacement

Introduction

Remove the lower case to access the internal components of your MacBook Pro.

Ce dont vous avez besoin

  1. MacBook Pro 13" Unibody Early 2011 Lower Case Replacement, Lower Case: étape 1, image 1 de 1

    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

    • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

    Modifier

  3. MacBook Pro 13" Unibody Early 2011 Lower Case Replacement: étape 2, image 1 de 2 MacBook Pro 13" Unibody Early 2011 Lower Case Replacement: étape 2, image 2 de 2

    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

60 autres ont terminé cette réparation.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 13

30 derniers jours : 48

Total : 35,912