Introduction
Replace the lower case in your MacBook Pro 13" Unibody Mid 2010.
Ce dont vous avez besoin
-
-
Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:
-
Seven 3 mm Phillips screws.
-
Three 13.5 mm Phillips screws.
-
-
-
-
Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
43 autres ont terminé cette réparation.
