Réparez vos affaires Communauté Boutique

MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Changing the top case will also give you a new trackpad.

Ce dont vous avez besoin

  1. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Replacement, Battery: étape 1, image 1 de 1

    • Use your fingers to push both battery release tabs away from the battery, and lift the battery out of the computer.

    Traduire

  2. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Replacement, RAM Shield: étape 2, image 1 de 1

    • Remove the three identical Phillips screws from the memory door.

    Traduire

  3. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Replacement: étape 3, image 1 de 1

    • Lift the memory door up enough to get a grip on it, and slide it toward you, pulling it away from the casing.

    Traduire

  4. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Replacement, Upper Case: étape 4, image 1 de 1

    • Remove the two 2.8 mm Phillips screws in the battery compartment near the latch.

    Traduire

  6. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Replacement: étape 5, image 1 de 1

    • Remove the following 6 screws:

    • Two 10 mm T6 Torx screws on either side of the RAM slot.

    • Four 14.5 mm Phillips screws along the hinge.

    Traduire

  7. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Replacement: étape 6, image 1 de 1

    • Remove the four 3.2 mm Phillips screws on the port side of the computer.

    Traduire

  8. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Replacement: étape 7, image 1 de 1

    • Rotate the computer 90 degrees and remove the two 3.2 mm Phillips screws from the rear of the computer.

    Traduire

  9. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Replacement: étape 8, image 1 de 1

    • Rotate the computer 90 degrees again and remove the four 3.2 mm Phillips screws from the side of the computer.

    Traduire

  10. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Replacement: étape 9, image 1 de 1

    • Do not yank the upper case off quickly. The case is attached to the logic board via a ribbon cable.

    • Lift up at the rear of the case and work your fingers along the sides, freeing the case as you go. Once you have freed the sides, you may need to rock the case up and down to free the front of the upper case (there are some hidden plastic clips that need to be clicked off).

    Traduire

  11. MacBook Pro 15" Core 2 Duo Model A1211 Upper Case Replacement: étape 10, image 1 de 1

    • Disconnect the trackpad and keyboard ribbon cable from the logic board, removing tape as necessary.

    • Remove the upper case.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 6 autres contributeurs

iRobot

Membre depuis le 09/24/09

1 Réputation

636 tutoriels rédigés

Badges: 36

+ 33 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,706