Introduction

Use this guide to help you replace a scratched, scuffed, bent or broken bottom panel on your MacBook Pro 15" Retina Display Early 2013.

  1. Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

      • Eight 3.0 mm

      • Two 2.3 mm

  2. %Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    • Set the lower case aside.

Conclusion

To reassemble your device, follow these instructions in reverse order.

11 autre(s) ont terminé cette réparation.

Sam Lionheart

Membre depuis le 18/10/2012

354 937 Réputation

537 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

109 membres

7 732 tutoriels rédigés

difficulty moderate? really?

goneiram - Réponse

The difficulty is listed as moderate due to the specialized tools required to get into the device. Not everyone has a pentalobe driver laying around! =)

Sam Lionheart -

Voir les statistiques:

Dernières 24 heures : 10

7 derniers jours : 24

30 derniers jours : 120

Total : 10,737